(Lathe => https://github.com/devenjarvis/lathe?tab=readme-ov-file#readme)
Gem: If we adapted the Lathe concept to a home improvement project like replacing a kitchen faucet, the AI wouldn't just give you a static YouTube video or a generic blog post. It would generate an interactive, step-by-step masterclass tailored to your exact sink setup. Yada, yada, yada...
RC: Rather that a video, adapt it to an image or images with text on a carousel-type series of webpages with pagination. That lets the user page back & forth between steps rather that fighting video speed. It also provides a good space for affiliate links to products used.
Gem: Here is how that interactive, carousel-style web interface looks. Instead of fighting with a video timeline, you control the pace using pagination buttons (**[Back]** and **[Next]**), with dedicated space for the exact tools and parts you need for each specific step.
---
### **[Page 1 of 4: The Water Shut-Off]**
| **Visual Workspace** | **Step-by-Step Instructions** |
| --- | --- |
| **[IMAGE: High-resolution photo of the hot and cold shut-off valves under the sink, with arrows showing clockwise rotation to close]** | 1. Clear everything out from under the sink.<br>
<br>2. Locate the two oval-shaped metal valves on the back wall.<br>
<br>3. Turn both handles **clockwise** until they stop.<br>
<br>4. Open the faucet handles upstairs to confirm the water is completely off.<br>
<br>
<br>> **Lathe Checkpoint:** Do you see any water dripping from the valves themselves? <br>
<br> **[ ] Yes** **[ ] No** *(Selecting 'Yes' dynamically changes Page 2 to a valve repair step).* |
**Tools & Products for this step:**
* [5-Gallon Plastic Bucket](https://example.com) (To catch residual water)
* [Microfiber Cleaning Cloths](https://example.com)
---
### **[Page 2 of 4: Disconnecting Supply Lines]**
| **Visual Workspace** | **Step-by-Step Instructions** |
| --- | --- |
| **[IMAGE: Close-up of an adjustable wrench fitted onto the water line nut, showing the counter-clockwise direction to loosen]** | 1. Place your bucket directly under the water supply lines.<br>
<br>2. Use an adjustable wrench to loosen the nuts connecting the hoses to the valves.<br>
<br>3. Turn the nuts **counter-clockwise** to loosen them.<br>
<br>4. Let any trapped water drain completely into the bucket.<br>
<br>
<br>> **Pro-Tip:** If the nut won't budge, do not force it. Tap the wrench gently with a shoe or mallet to break the tension. |
**Tools & Products for this step:**
* [10-Inch Adjustable Wrench](https://example.com)
* [Penetrating Oil Spray](https://example.com) (For rusted nuts)
---
### **[Page 3 of 4: Removing the Faucet Base]**
| **Visual Workspace** | **Step-by-Step Instructions** |
| --- | --- |
| **[IMAGE: Diagram looking straight up behind the sink bowl, showing the large plastic or metal mounting nut securing the faucet]** | 1. Lay on your back under the sink to look directly up behind the basin.<br>
<br>2. Locate the mounting nut holding the faucet to the countertop.<br>
<br>3. Reach up with a basin wrench, grip the nut, and turn it counter-clockwise to remove it.<br>
<br>4. Pull the old faucet straight up and out from the top of the sink.<br>
<br>
<br>> **Interactive Choice:** Is your new faucet a single-hole or three-hole model?<br>
<br> **[ single-hole ]** **[ three-hole ]** *(Your choice configures the next page's layout).* |
**Tools & Products for this step:**
* [Telescoping Basin Wrench](https://example.com) (Essential for tight spaces behind the sink)
* [Plastic Scraper](https://example.com) (To clean old putty off the counter)
---
### **[Page 4 of 4: Installing the New Faucet]**
| **Visual Workspace** | **Step-by-Step Instructions** |
| --- | --- |
| **[IMAGE: Animation or clear diagram showing the new faucet lines feeding down through the countertop hole with the rubber gasket in place]** | 1. Clean the countertop surface thoroughly.<br>
<br>2. Drop the new faucet hoses down through the center hole, ensuring the rubber sealing gasket sits flat on the counter.<br>
<br>3. From underneath, hand-tighten the new mounting nut onto the threaded shank.<br>
<br>4. Secure it firmly with your wrench, ensuring the faucet stays straight above.<br>
<br>
<br>> **Final Verification:** Check that the faucet alignment matches the front of your sink before doing the final tightening. |
**Tools & Products for this step:**
* [Example Brand Single-Handle Kitchen Faucet](https://example.com)
* [Silicone Plumber's Sealant](https://example.com)
---
### **[◀ Back]** **[1]** **[2]** **[3]** **[4]** **[Next ▶]**